Are you a handyman? Are you more artistically inclined? Do you like the thought of making beautiful things from wood? If so, you are like many other people that take pleasure in creating with wood. The key to having fun with woodworking is knowing some tips to help, which is what this article is going to show you.
Tape can be your friend when gluing stained wood together. Place the two pieces of wood together in a clamp and tape the seam before applying the glue. Carefully cut the tape along the joint and then separate the two pieces of the wood and apply the glue along the joint. Clamp together and allow to dry. The tape will keep the glue off the wood and is easy to remove once the glue is dried.
Be sure to keep your bandsaw clean at all times. It is best to have a duster on hand when you are doing the sawing for your woodworking project so that you can clean the saw after each time that you use it to cut wood. This will ensure that you can get a great cut every time.
When sanding a piece of lumber, a lot of sawdust and debris is produced. To help remove those bits of dust and debris from your project vacuum the area. Then, remove the remaining debris using a tack cloth. Wipe both sides of the lumber to remove all traces of debris for best results.
Never use your own fingers as guidance when cutting narrow chunks of wood. Instead, use a piece of scrap wood to safely push the lumber through your table saw. This helps you keep every finger, which are required for doing future woodworking.
Keeping a little ruler inside your pocket is smart, but it could fall out when bending over due to its length. If you purchase a metal ruler, you can keep it in your pocket with a telescoping magnet. The magnet will keep the ruler safely in your pocket.
Sometimes a little bit of glue is better than a clamp. Every woodworking shop should have a hot glue gun. Hot glue will hold small pieces better than any clamp ever could, if you could even maneuver one in place. When you are done, just gently pry loose with a putty knife.
Do you hate those bubbles that form when applying joint compound to your drywall? There is a simple trick that professional drywallers use to avoid this annoying problem. Add two or three drops of dish detergent to your joint compound and you will be rewarded with bubble free joint compound.
Never cut any pieces of wood without checking for nails, screws and other metal. While donning a pair of goggles keeps your eyes protected, you are still at risk for other injuries. Inspect every piece of wood whether you are re-purposing it or using new lumber. You are better safe than sorry with this safety tip, and checking the boards only takes a few minutes of your time.
As you can see, woodworking takes a bit of know-how and creativity. No matter what kind of woodworking you may be in to, having tips and tricks in your tool belt are just as important as the actual tools. Take what you have learned here and have some fun putting your skills to work.